Drcpwen Posted March 24, 2020 Share Posted March 24, 2020 I'm refurbishing a Dixie Narco machine. The black sides have some blemishes that I've decided to re-coat with paint. It looks like I need to break it down and spray but some people tell me I can roll it with a good quality oil based satin. Can anyone give me some advice? Thanks, Dan Link to comment Share on other sites More sharing options...
Vending Works Posted March 24, 2020 Share Posted March 24, 2020 When I used to refurbish vending machines I used Hy-Lux industrial paint. It's high quality paint, can be sprayed or rolled. Link to comment Share on other sites More sharing options...
cvending Posted March 24, 2020 Share Posted March 24, 2020 We have used paint from a local hardware store and the local Sherwin Williams Paint Store. Both worked well. We used both-roller and a small spray gun. Both were latex paint. Link to comment Share on other sites More sharing options...
ABCVending Posted March 25, 2020 Share Posted March 25, 2020 I had some Mercury/Mercruiser marine paint laying around - same paint the put on the Mercruiser outdrive that will last yeas in salt water. Not sure where I got it but Amazon or West Marine probably have it - super tough and pretty easy to work with. Link to comment Share on other sites More sharing options...
dwc31015 Posted March 28, 2020 Share Posted March 28, 2020 Have you considered vinyl wrap? Much easier in my opinion. Can get black from NBS. The black is the same mil as the Pepsi/Coke decals. Ive also used Rustoleum paint/primer gloss and it works well. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now