Sorasworld Posted June 21, 2020 Share Posted June 21, 2020 Hello everyone at vendiscuss, I am currently in the process of buying a AP112. However, when I tested the machine out. The machine reads, "Make another selection" when I try to make a selection. I tested out the bill mech, coin mech, and the motor. They all work. Is there any solution to this problem. If anyone has any insight based on this issue please reply. I greatly appreciate everyone's help. Link to comment Share on other sites More sharing options...
allen watson Posted June 21, 2020 Share Posted June 21, 2020 Check the price setting. 1 Link to comment Share on other sites More sharing options...
Sorasworld Posted June 21, 2020 Author Share Posted June 21, 2020 19 minutes ago, allen watson said: Check the price setting. Okay, I'll have to check it tomorrow or Tuesday because I left the location. When I tried change and dollars the vending machine accepted them. However, it did not vend out the snacks once in operation mode. I tried to fill up one column with snacks and it still didn't dispense. Thank you for your advice. I'll be sure to reply to you based on the results I get regarding the price settings. Thank you - Brandon Link to comment Share on other sites More sharing options...
allen watson Posted June 21, 2020 Share Posted June 21, 2020 Just a guess. I have a bunch of AP’s. The issue you are having is usually a price setting. Rarely a motor Link to comment Share on other sites More sharing options...
cvending Posted June 21, 2020 Share Posted June 21, 2020 Is the control board OEM or has it been upgraded? If upgraded, which upgrade? Link to comment Share on other sites More sharing options...
Sorasworld Posted June 22, 2020 Author Share Posted June 22, 2020 I'll have to check tomorrow or tuesday. I believe it's an older model 112. It had an old coin mech. I'll post pictures soon. Thank you for your reply and help. Link to comment Share on other sites More sharing options...
Sorasworld Posted June 23, 2020 Author Share Posted June 23, 2020 On 6/21/2020 at 4:24 PM, allen watson said: Check the price setting. I checked the pricing and it worked. Thank you so much Mr.Watson. Link to comment Share on other sites More sharing options...
allen watson Posted June 23, 2020 Share Posted June 23, 2020 That’s good news! 1 Link to comment Share on other sites More sharing options...
Sorasworld Posted June 23, 2020 Author Share Posted June 23, 2020 (edited) On 6/21/2020 at 5:52 PM, cvending said: Is the control board OEM or has it been upgraded? If upgraded, which upgrade? Hello cvending, I checked the pricing as recommended by Mr.Watson and it worked. However, I was thinking of upgrading the machine. I took a picture of the control board and I was wondering if you can tell me if it would be compatible with a newer model bill acceptor, coin mech, and credit card reader. Where would I start to do this upgrade? Also, which control board should I order if any? Edited June 23, 2020 by Sorasworld photo Link to comment Share on other sites More sharing options...
cvending Posted June 23, 2020 Share Posted June 23, 2020 That OEM board is not credit card compatible. I would suggest the UCB board from Vendors Exchange. Most UCB boards will let you use either MDB or original mech & validated. Not sure that option is available on your model machine. Call Vendors and they can tell you for sure. 800-321-2311. 1 Link to comment Share on other sites More sharing options...
Sorasworld Posted June 23, 2020 Author Share Posted June 23, 2020 Okay, thank you for you reply. I really appreciate it. Link to comment Share on other sites More sharing options...
Sorasworld Posted June 23, 2020 Author Share Posted June 23, 2020 18 minutes ago, Sorasworld said: Okay, thank you for you reply. I really appreciate it. I looked on the vendors exchange and the price is fair. I was wondering if there would be a better bill acceptor and coin mech I can use meanwhile? I would like to make money with this new machine before I invest more money into it. Do you have any advice on which new bill and coin mech I can use? Here are the names of the current ones in the machine. If you have any advice I would greatly appreciate it. Link to comment Share on other sites More sharing options...
Sorasworld Posted June 23, 2020 Author Share Posted June 23, 2020 Bill acceptor: VFM3- L2-U4C Coin mech: TRC-6010XV Link to comment Share on other sites More sharing options...
orsd Posted June 24, 2020 Share Posted June 24, 2020 Mech is fine. Bill validator, get a Mars VN25x1. The VFMs are garbage now. 1 Link to comment Share on other sites More sharing options...
Sorasworld Posted June 24, 2020 Author Share Posted June 24, 2020 4 hours ago, orsd said: Mech is fine. Bill validator, get a Mars VN25x1. The VFMs are garbage now. Thank you for your reply orsd. I really appreciate it. Link to comment Share on other sites More sharing options...
Popular Post AZVendor Posted June 24, 2020 Popular Post Share Posted June 24, 2020 I would consider an InOne kit instead of the VE board because lots of people have issues with the VE board that aren't easy to diagnose. InOne seems to have better support. 1 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now