Carmenh Posted July 3, 2020 Share Posted July 3, 2020 I can't get the display to light up. It was working fine and when I went to fill it I had complaints of it taking their dollars so I put one in and sure enough it took it. The display was not lit up. It will take bills but not coins. I have tried a different coin mech. A different display board and I believe the main board. I'm at a loss! Link to comment Share on other sites More sharing options...
AZVendor Posted July 3, 2020 Share Posted July 3, 2020 Turn it off, unplug the display harness from the display and the logic board, replug the harness in on both ends and fire it up. If it doesn't work then either both displays are bad or the logic board is bad. If you had a spare display then you have a spare machine? If so then put both displays in that machine. If they both work then put the board from that machine into this one and see if it works. That will tell you if the original board is bad. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now