Jump to content
saberwielders

16oz Red Bull always jams Royal 650

Recommended Posts

Sorry total newb here to vending and first post so go easy on me.  I have a Royal 650 all setup for 20oz bottles.  Trying to vend 16oz Red Bull in it and it has worked sporadically but will jam after it vends 4 or 5 times successfully.  Am I doing something wrong?  Need a shim?  Thanks in advance.  Looking forward to the vending journey.  

Royal650.jpg

Share this post


Link to post
Share on other sites

Make sure the anti-bridging teflon sheets are applied to that column so the cans won't bridge (get stuck side by side.)  Then you need to ensure that you have set your product depth to CAN so the motor will stop sooner and not allow cans to stack on each other in the rotor.

Share this post


Link to post
Share on other sites

Sorry for my ignorance but that sounded your response was in another language.  Can you clarify?

Share this post


Link to post
Share on other sites

Yes, you need a shim.  Royal only has one shim that I know of, a metal flap that inserts in the 2 horizontal slots on the left side of the column just above the cam, it hangs down and fills in the gap so only one product at a time will try to vend.  Cheap and easy to install.  I have vended 16 oz and 12 oz red bull in that model of machine using the shim and have no problems.

Share this post


Link to post
Share on other sites

As for AZ's answer, the anti bridging sheets are the plastic sheets that are on both sides of the column a little further up, they help keep the containers from jamming together in the column.  An occasional cleaning with a clean cloth and food grade silicon keeps them happy, but that is not your problem here.  As for the "can" setting, I have no idea, I have never seen that in the royal programming myself.  You depth selection (SDEP) in programming should be set to 1 for single depth product, again not seeing that as the problem in your photo though.

Share this post


Link to post
Share on other sites

Can anyone show me what this shim looks like or link to one?  Sorry totally new at this I really appreciate the great information and support.

Share this post


Link to post
Share on other sites

Would this be the correct shim to use?  Its the "royal water shield".  I see like 5 or 6 different Shims for Royal and not sure which one to use.

5609.jpg

Share this post


Link to post
Share on other sites

No. That is a bracket that mounts above the bill acceptor opening.  You need the bottle filler shims.

Share this post


Link to post
Share on other sites

Ok so the only bottle filler shim I see is for the 16.9oz bottles....i need a shim for 16oz can and the shim for the 16.9 oz bottles looks longer than the 16oz can so it wouldn't work.

Share this post


Link to post
Share on other sites

There is only one shim for the royal vendor, it fits the depth of each column. 

Share this post


Link to post
Share on other sites
15 hours ago, Southeast Treats said:

There is only one shim for the royal vendor, it fits the depth of each column. 

And that one shim is?  

Share this post


Link to post
Share on other sites

Sorry I don't have a part number for you.  If you call Royal parts dept or a vending parts supplier they should be able to understand "royal 650 shim".  If you call Royal they may take a long time shipping, they have been pretty backed up since they moved.  If you don't know any parts suppliers this is a list of some I have used, in no particular order.  Other people here may have other suggestions for suppliers.

https://www.royalvendors.com/customer-service/contact-support/

https://www.dsvendinginc.com/

http://www.thevendingcenter.com/

https://www.veii.com/

 

 

Share this post


Link to post
Share on other sites

search  "royal 650 shim" on ebay, not always the cheapest, but do show up

Share this post


Link to post
Share on other sites
On 7/16/2020 at 11:48 PM, Southeast Treats said:

Sorry I don't have a part number for you.  If you call Royal parts dept or a vending parts supplier they should be able to understand "royal 650 shim".  If you call Royal they may take a long time shipping, they have been pretty backed up since they moved.  If you don't know any parts suppliers this is a list of some I have used, in no particular order.  Other people here may have other suggestions for suppliers.

https://www.royalvendors.com/customer-service/contact-support/

https://www.dsvendinginc.com/

http://www.thevendingcenter.com/

https://www.veii.com/

 

 

Thank you

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...