431 d, what would you fix/replace/update

[chris in bc]

I just received 2 crane 431D shoppers. What would you fix first, replace, update. These machines will vend only Mr.Noodles so health control is not required....in fact i won't even use the cooling system. 

[lacanteen]

Here's the 10 foot pole you'll need

[Vendo Mike]

check/clean all of your door switches and locking actuators so to ensure they don't stick when a customer is trying to open them.  Clean the encoder on the turret motor and make sure the turret stop pin assy is working correctly. They sometimes need to be adjusted or shimmed.  I can't remember if the health lock  function can be turned off on the 431.  If not, it won't allow a vend once it engages.  It's going to look for the temp to be 41 F or below within 30 minutes of door closure.  If it doesn't reach that threshold, it's going to lock out sales and read "Out of Service" on the display.

[AZVendor]

The health control can't be bypassed.  You could only do that on a Rowe 448.

[NYCandyMaN]

if its not broken, dont fix it