Arica Posted June 8, 2021 Share Posted June 8, 2021 Our Vending machine in the shop is messing up once more. The machine is set to vend at .75 cents. The issue we're having now is that it takes far more than 3 quarters to vend and a different amount of quarters every time. I had to put at LEAST 20 quarters in the machine to get it to vend, I then unplugged the machine for a minute to try and reset everything. After this I was able to get it to vend on 4 quarters, then 5, then 6, then 7, then 8 and then 10. the amount went up every time and I cannot figure out what is causing this to happen. the machine runs fine, we couldn't find anything blocking the coin track, the quarter slot in the coin credit stash isn't full and no coins are stuck. It will not return change either. If any one can help that would be amazing! Link to comment Share on other sites More sharing options...
AZVendor Posted June 8, 2021 Share Posted June 8, 2021 That is a bad coin mech. Replace it with a Coino 9340 or 9360S or a Mars TRC6200 or 6800H. Link to comment Share on other sites More sharing options...
Vendo Mike Posted June 11, 2021 Share Posted June 11, 2021 Does it have a bill acceptor? If so and its a Mars unit (VFM), I would lean toward the TRC6800H as that already has all the necessary harnessing. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now