the results are in...sort of...dentyne ice wheel mod.

[JPVendCo.]

ok yesterday i received my test dentyne ice wheel, (thanks islander). I was astounded to find out it would not take much to make this work in a vendstar at all. the wheel is the right size, but the bottom plate will require a small mod to it to work. and you cant just not use the plate, cause you need it to make it the right hieght for the vendstar "brush"

oaks on the other hand, might take a little more thought. let me do some testing, and I will see how it goes!

[lurtsman]

Toss up the pics 2. Once we make this work, we can sell a ton of DI.

[JPVendCo.]

one view

[JPVendCo.]

heres the other problem..

[JPVendCo.]

okay. so there are a few minor problems....the top image shows the spacer. the spacer must be trimmed for the coin mech to fit in and turn the wheel. the wheel fits great, just need that spacer out of the way on the coin mech side. second images shows the portion "wiper" i guess is what you would call it. it is a little short and sometimes lets some sneak in. I have a solution for this, its made out of a silicon spatula!

[antoniocinisi]

 its made out of a silicon spatula!

very clever and inventive!