Info Posted June 16, 2022 Share Posted June 16, 2022 Our company boss bought used vendo 721 machines from someone. Please see picture showing one of them. There is password that is not allowing to access setting . especially to change the price Version on this eprom is 12.4 Rv 44 Could you Please advice me what is procedure to reset password or what are default passwords I should try? Also its very confusing how numbers are associated with buttons. As you can see there is 10 button for selection Any advice will be very appreciated Link to comment Share on other sites More sharing options...
Vendo Mike Posted June 16, 2022 Share Posted June 16, 2022 You have a Pepsi HV3 door on your 721 cabinet. Space to Sales programming determines the selection button/vend motor relationship. Buttons are counted left to right and then top to bottom so 1-4 across the top 5 and 6 in the middle and 7-10 across the bottom. Motors are counted from right to left when looking inside the cabinet so, if this is still set as standard, Selection#1 (top/left) is tied to motor #1 (far right)...selection #10 (bottom/right) is tied to motor #10(far left). Keep in mind that they can be configured in any way. The bottler your boss purchased from should be able to share the password to allow price setting and other protected programming. Link to comment Share on other sites More sharing options...
AZVendor Posted June 17, 2022 Share Posted June 17, 2022 The standard PW should be 4231 but it might require an ENTER before or after the PW is entered. Link to comment Share on other sites More sharing options...
Vendo Mike Posted June 17, 2022 Share Posted June 17, 2022 14 hours ago, AZVendor said: The standard PW should be 4231 but it might require an ENTER before or after the PW is entered. Press 4 at the end of the password. Link to comment Share on other sites More sharing options...
Info Posted June 21, 2022 Author Share Posted June 21, 2022 Thank you everyone for advices . I will be on site Thursday so I'll try to test it. Link to comment Share on other sites More sharing options...
Info Posted June 22, 2022 Author Share Posted June 22, 2022 If this password doesn't work. What is the process to reset password or reset all setting? Thank you in advance Link to comment Share on other sites More sharing options...
AZVendor Posted June 22, 2022 Share Posted June 22, 2022 Here is the manual: https://e4995306-5b39-4820-8d83-ef2846e90a02.usrfiles.com/ugd/e49953_f65697643cfa4794a0a94feb4c4b530e.pdf Get comfortable with it. Link to comment Share on other sites More sharing options...
Info Posted June 23, 2022 Author Share Posted June 23, 2022 I read this manual already and I dont see how to reset password or how to reset machine to default one. Could you Please advice. Thank you Link to comment Share on other sites More sharing options...
AZVendor Posted June 23, 2022 Share Posted June 23, 2022 If you are unable to enter programming with the 4231 password then you'll have to call Vendo tech support to help you reset it. Link to comment Share on other sites More sharing options...
Vendo Mike Posted June 23, 2022 Share Posted June 23, 2022 Trying to be careful with regards to sharing such info on an open forum. Since your employer purchased the machine from a bottler, your best route would be to ask them what password they used as they must have changed it. Once you have that password, you'll be able to set a new one. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now