Trillz22 Posted April 8, 2023 Share Posted April 8, 2023 Hi i have a snackshop7600 i bought off someone that came with location I’m trying to change price but when i press the button on the back the display reads passcode i called previous owner who can’t remember passcode the motherboard has been updated to be able to have a card reader on there how can i reset passcode ? Link to comment Share on other sites More sharing options...
AZVendor Posted April 8, 2023 Share Posted April 8, 2023 It sounds like you have an InOne board or a UCB board in the machine. Check the appropriate manual for the reset or post which board you have. Link to comment Share on other sites More sharing options...
Trillz22 Posted April 8, 2023 Author Share Posted April 8, 2023 The board states it’s a windstar board can you please point me in the right direction for the manual i been at this for weeks this the first forum someone reach back to me Link to comment Share on other sites More sharing options...
AZVendor Posted April 8, 2023 Share Posted April 8, 2023 (edited) Never heard of a Windstar board and nothing comes up on the Google machine. Post a photo of it. Are you in the US? Edited April 8, 2023 by AZVendor Link to comment Share on other sites More sharing options...
Trillz22 Posted April 8, 2023 Author Share Posted April 8, 2023 Maybe it’s not i just seen a sticker on it i don’t have a pic of it right now if u can help me with the two options u spoke of manuals yes I’m in Georgia Link to comment Share on other sites More sharing options...
AZVendor Posted April 8, 2023 Share Posted April 8, 2023 UCB: http://images.veii.com/images/Manuals/UCB/UCB-Kit-VE5850_For_AP-6000_7000_Rev 7-15.pdf InOne: https://www.vendmedic.com/inone-technology-manuals/ Link to comment Share on other sites More sharing options...
Trillz22 Posted April 8, 2023 Author Share Posted April 8, 2023 These don’t show any reset Link to comment Share on other sites More sharing options...
AZVendor Posted April 8, 2023 Share Posted April 8, 2023 Call them when you figure out which one you have. Link to comment Share on other sites More sharing options...
Trillz22 Posted April 8, 2023 Author Share Posted April 8, 2023 Ok i appreciate your help i have a combo machine too that the drinks aren’t staying cold as i would like is that fixable thru programming ? Link to comment Share on other sites More sharing options...
AZVendor Posted April 8, 2023 Share Posted April 8, 2023 No. What model is that? Link to comment Share on other sites More sharing options...
Trillz22 Posted April 8, 2023 Author Share Posted April 8, 2023 National crane 484 or 474 Link to comment Share on other sites More sharing options...
AZVendor Posted April 9, 2023 Share Posted April 9, 2023 Probably low freon. Link to comment Share on other sites More sharing options...
Trillz22 Posted April 9, 2023 Author Share Posted April 9, 2023 Is that something i can just add to it or i gotta get a serviceman Link to comment Share on other sites More sharing options...
AZVendor Posted April 9, 2023 Share Posted April 9, 2023 We always recommend an experienced service tech to do it. If you do it wrong you shorten the life of the compressor or can cause injury to yourself. It likely has a port tapped in to it already after all these years, though we don't know how old the compressor really is. You do have to recharge it through AC gauges so you don't overcharge. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now