marzban Posted July 8 Share Posted July 8 So, I found out that my control board died. A lizard had made a home behind the board and got quite a shock. The result was a completely fried board. My question is, do I have to replace the board with the exact same model and revision? It seems that this exact 5.1b is a little hard to find and expensive. I have seen a 5.1 Ver 1.068 on ebay for under $100. I have also seen a 5.2 for $140. Link to comment Share on other sites More sharing options...
AZVendor Posted July 8 Share Posted July 8 5.2 boards are for Coke doors. Get any 5.1b board and you'll be fine. Why not do an exchange board with Dieb or Vendors Exchange? You don't have to buy a board outright unless yours is not repairable such as the traces lifting off the board. That might be the case with yours but I can't tell. Link to comment Share on other sites More sharing options...
marzban Posted July 9 Author Share Posted July 9 20 minutes ago, AZVendor said: 5.2 boards are for Coke doors. Get any 5.1b board and you'll be fine. Why not do an exchange board with Dieb or Vendors Exchange? You don't have to buy a board outright unless yours is not repairable such as the traces lifting off the board. That might be the case with yours but I can't tell. Unfortunately, traces are beyond lifting. They have been burnt to a crisp. Okay, so a 5.1 board will not work then. It must be a 5.1b Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now