Lance Posted July 11 Share Posted July 11 Looking for a DN 501e HVV SIID control board. Mine died. Link to comment Share on other sites More sharing options...
Gizmo Vending Posted July 11 Share Posted July 11 What happened that it died? Sure it’s not the fuses? Where I’m at American Vending Sales has a board exchange service. Capital Vending, D&S, Vendors Exchange, just ti name a few, will have em as well. 1 Link to comment Share on other sites More sharing options...
NYCandyMaN Posted July 11 Share Posted July 11 united changers UCI Link to comment Share on other sites More sharing options...
Lance Posted July 11 Author Share Posted July 11 Thanks. Looks like the board itself has a short on it because whenever I put a fuse in it, it’s blowing the fuse. I checked all the motors and nothing is locked up so I’m thinking maybe a power surge or some thing happened that fried the board. Link to comment Share on other sites More sharing options...
Vendo Mike Posted July 11 Share Posted July 11 Which fuse is blowing? The SiiD has 3. Link to comment Share on other sites More sharing options...
Gizmo Vending Posted July 11 Share Posted July 11 The fuse is blowing for a reason and blows to protect the board. You’ll be able to buy the 1 and 6 amp fuses locally at auto parts store or hardware stores. The 1.6 amp fuse (probably the 1 you’re needing) will have to come from someplace that sales electronic stuff or online. You’ll need a few with you because you will insert fuse trying to see what is causing it to blow. Link to comment Share on other sites More sharing options...
AZVendor Posted July 12 Share Posted July 12 Unplug everything from the board except the power and then if the fuse blows is a short in the board. If not then add one circuit at a time to see which one blows it. Link to comment Share on other sites More sharing options...
Lance Posted August 27 Author Share Posted August 27 Thanks all for the tips and recommendations. Since I’m in Maryland, I contacted Capital Vending. Those guys are awesome. I purchased a new board, picked it up locally and installed it. Not sure what caused the old board to go bad but it was definitely the board causing the fuses to blow. back in action! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now