vendpaka Posted July 11 Share Posted July 11 i just got an Ap 6600 snackshop vending machine and all is well except two selection automatically spin once, one after another right after i power the machine on. Then as i put money in the machine and try those two selections it displays "make another selection". all other selections work fine and it's obvious the motors are functioning well. Any idea what the machine is telling me? Thank in advance! Link to comment Share on other sites More sharing options...
vendpaka Posted July 11 Author Share Posted July 11 Just now, vendpaka said: i just got an Ap 6600 snackshop vending machine and all is well except two selection automatically spin once, one after another right after i power the machine on. Then as i put money in the machine and try those two selections it displays "make another selection". all other selections work fine and it's obvious the motors are functioning well. Any idea what the machine is telling me? Thank in advance! i've read through the manual several times for this and other snackshops i've had but no luck. maybe i'm missing something Link to comment Share on other sites More sharing options...
AZVendor Posted July 12 Share Posted July 12 If they are on the same shelf then you have a shorted wire somewhere on the shelf or maybe a bad board on one of the motors. Swap shelves around and see if the problem follows the shelf. If it does then one of those two motors is likely the culprit if they are the only ones that do this. Link to comment Share on other sites More sharing options...
vendpaka Posted July 14 Author Share Posted July 14 (edited) On 7/11/2023 at 9:28 PM, AZVendor said: If they are on the same shelf then you have a shorted wire somewhere on the shelf or maybe a bad board on one of the motors. Swap shelves around and see if the problem follows the shelf. If it does then one of those two motors is likely the culprit if they are the only ones that do this. Update. It turned out to be a loose wire on one and a broken connector on the other. I went ahead ind fixed both. All is good. Thank you! Now I have a similar issue where another snack machine says make another selection. Everything seems to be connected properly and the problem doesn't follow the shelve. Even after switching shelves around, the "make another selection issue" stays only on the top level at selection A2. I checked the female pins at the back of the machine where the tray connects and they look intact. I made sure there is a price set on the selection as well... Any ideas of what could be going on? Thanks in advance! Edited July 14 by vendpaka Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now