detbjr Posted September 2 Share Posted September 2 I think my condenser fan is no good - the wires leading to the motor are burned up and the machine is not cooling. Does anyone have a good source for these motors? The machine is a dncb 414. thanks! Link to comment Share on other sites More sharing options...
AZVendor Posted September 2 Share Posted September 2 You can get one from Grainger. Take the motor with you to get a perfect match in wattage (9W) and rotation direction. The DN414 was always an oddball and it weighs a ton since it has so much steel in it. Keep it going. Link to comment Share on other sites More sharing options...
detbjr Posted Wednesday at 07:41 PM Author Share Posted Wednesday at 07:41 PM So I was able to get out there and look. The wiring on the fan was shot- insulated dry rotted and shorting. When I disconnected the fan and turned the machine on, the compressor would run but now not get cold. Im thinking my Freon ran out. I could see an oily residue on one of the copper tubes heading into the compressor. Sooo it maybe time for a refrigeration deck. Any good experience with the refurb units on monstervending or vending works? Given the work I put into the rest of the machine I’d rather just fix the fridge deck then mess around with another unit. Link to comment Share on other sites More sharing options...
AZVendor Posted Wednesday at 08:27 PM Share Posted Wednesday at 08:27 PM You can have a good vending refrigeration tech do a bench repair on the leak. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now