Nick505 Posted October 23, 2011 Share Posted October 23, 2011 Well I have found a deal?...for a shootin hoops. I purchased a brand new machine minues the lock and stand for $150.00 I noticed a normal camlock does not fit on the machine. Are there any members who have an extra beaver lock & key they would sell? Nick Link to comment Share on other sites More sharing options...
Nick505 Posted October 25, 2011 Author Share Posted October 25, 2011 Thanks for the info. I must admit that it looks pretty nice with the vendstar stand. It just flows into the machine perfectly. Now I need to get this sucker out there collecting! Link to comment Share on other sites More sharing options...
Nick505 Posted October 25, 2011 Author Share Posted October 25, 2011 Looks good, but how did you attach the vendstar stand to base of machine? Well a few months ago I acquired about 8 vendstars off of craigslist at no cost. Two of them were in good enough shape for location and the other six were trash. So I have been using them for their stands by cutting the bottom part of the vendstar off leaving only the flat bottom piece of it. (It kind of looks like a stand already containing a double or triple plate.) Anyways I didn't need it to be that long so I cut it with about 4 inches remaining on each side of the center of the pipe. I then cut a piece of 1/4 inch plywood to fit on top to reinforce the plastic and also that is what I bolt the machine onto. Hope this isn't to complicated to understand without pictures! I should have taken some one I was in the process of making the stand. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.