Adjust toy wheel in NW Super 60 for 1.1

[guile]

Now that I got a couple of wheels, I'm having a little trouble. I thought I had everything correct after several test vends. I guess I didn't have the wheel set up right. Are there pictures of how to line up the wheel?

g

[West Coast Vend LLC]

g

I would say that without seeing the wheel that you have, the opening in the wheel must be lined up with the opening below it. There should be a spring or two over that area so the capsules don't fall through. 3 capsules should fill the holes. After the coins are placed and the handle is turned, the first loaded wheel hole will drop a capsule down the chute.

Gary

[guile]

g

I would say that without seeing the wheel that you have, the opening in the wheel must be lined up with the opening below it. There should be a spring or two over that area so the capsules don't fall through. 3 capsules should fill the holes. After the coins are placed and the handle is turned, the first loaded wheel hole will drop a capsule down the chute.

Gary

Maybe I could take a picture (or two). While it seems easy enough to figure out, for some reason, it will not vend product on about the 5th vend. It's pretty consistent too.

g

 

 

[West Coast Vend LLC]

g

Post some pictures so we can get this fixed.

Gary

[Big Mike]

You sure you have a cap wheel? If you have a gumball wheel the holes are not big enough.

Mike