Mike Nicholas Posted November 2, 2018 Share Posted November 2, 2018 I can't remove the Brew Group from a Saeco SG 200 coffee machine. I think it's because the little egg shaped lobe on the brew group is not hitting the switch. Does anyone know how to advance the brew group so it can be removed from the machine? Link to comment Share on other sites More sharing options...
panamanreed Posted December 24, 2018 Share Posted December 24, 2018 Hi I hope this is not too late. To move the drive motor of the Brew Group you can put the machine in maintenance mode then push the #2 button. That is the 3rd button on the left side. It will move the motor. This information in on page 42 of the manual under sub heading Recommended Solutions. If it jams, then it is not a lot of fun. I don't know if there is an easy way to remove a jammed brew group. I wrestled with mine for 2 days, then when I least expected it, it just came out. I found it helpful to remove the ground coffee fee (2 screws" that sits over the brew group.T Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.