Hillbilly Posted February 13, 2016 Share Posted February 13, 2016 Anybody know where I can get some Toy N Joy locks and keys for 1" machines? I have 6 I am going to sell off but dont have locks. Regular style 1/4" locks will not work. Thanks for the input. Link to comment Share on other sites More sharing options...
musser Posted February 13, 2016 Share Posted February 13, 2016 Are they 5/16? Some victors were ( or are you talking about victors on a t&y rsck) if so A&A might have some as at one time they had victor parts. Also can you drill and tap the locks to 5/16? Link to comment Share on other sites More sharing options...
Hillbilly Posted February 13, 2016 Author Share Posted February 13, 2016 Are they 5/16? Some victors were ( or are you talking about victors on a t&y rsck) if so A&A might have some as at one time they had victor parts. Also can you drill and tap the locks to 5/16? They are cam locks that go in the front of the machine. They are the same size as a standard 1/4" lock body wise but the cam portion attaches to the lock with a nut. Using the regular locks puts the cam too deep in the machine to securely fasten it. No they are not the Victors Link to comment Share on other sites More sharing options...
musser Posted February 13, 2016 Share Posted February 13, 2016 I realized I goofed up after I posted, victors were only used on the top. Do you have any key numbers? Do you have a depth measurement? I may have some laying around but don't remember how long the lock body is. Link to comment Share on other sites More sharing options...
Hillbilly Posted February 13, 2016 Author Share Posted February 13, 2016 I realized I goofed up after I posted, victors were only used on the top. Do you have any key numbers? Do you have a depth measurement? I may have some laying around but don't remember how long the lock body is. No key numbers. I bought a rack I happened to see at a yard sale. I had to drill all the locks. It appears to be a 5/8" That is from under the head to the bottom of the cam. Under the head is double stepped. This measurement is the longer step. Hope that makes sense. Been to a couple locksmith places and they can't help. I don't have much in the machines but figured I could make a few bucks on them. If I can't find locks I will just part them out. If you would PM me a cell phone number I will send you pics of the locks. Link to comment Share on other sites More sharing options...
musser Posted February 13, 2016 Share Posted February 13, 2016 Ok, but I will check around the shop today to see if I can find them. You know how it is, I usually save locks from various machines I scrap. Measure diameter too Link to comment Share on other sites More sharing options...
allgum4me Posted February 14, 2016 Share Posted February 14, 2016 Might want to try Crow River Trading....seems to have an assortment of locks, including cam...they have even found some obsolete items for me. Link to comment Share on other sites More sharing options...
Hillbilly Posted February 15, 2016 Author Share Posted February 15, 2016 Might want to try Crow River Trading....seems to have an assortment of locks, including cam...they have even found some obsolete items for me. Yeah, I finally looked there. $25 a pop!! Link to comment Share on other sites More sharing options...
allgum4me Posted February 15, 2016 Share Posted February 15, 2016 Yikes!!! I know that's for new, but geeeeeeez!......maybe somebody will have some in their "this n' that" assortment Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.