havending Posted March 15, 2012 Share Posted March 15, 2012 With a crane with out a dba when adding one I know you take out a coin meck and cut out the hole. Have any of you done it what tool did you use? Sent from my Desire HD using Tapatalk Link to comment Share on other sites More sharing options...
Nick505 Posted March 15, 2012 Share Posted March 15, 2012 I have never done this but on wood or metal I would use a jigsaw. Start with a drill to start the whole and then just cut out your pattern. I think I would cut a 1/16th of an inch on the inside of your line or pattern and then knock off the 1/16th with a metal file. This will insure a perfect fit and also take care of any sharp edges. Link to comment Share on other sites More sharing options...
dogcow Posted March 17, 2012 Share Posted March 17, 2012 do you mean in the coin door or the wood? If you have one with an over/under coin door system (like on an arcade game) i would simply replace the bottom coin box door with one with a validator cut out already done. i posted over on the arcade museum forum and someone just sent me a few free. If not you can get them from happ contorls. Link to comment Share on other sites More sharing options...
Big Mike Posted March 18, 2012 Share Posted March 18, 2012 With a crane with out a dba when adding one I know you take out a coin meck and cut out the hole. Have any of you done it what tool did you use? Sent from my Desire HD using Tapatalk Are you sure it doesn't have a removable plate for the DBA? Link to comment Share on other sites More sharing options...
havending Posted March 20, 2012 Author Share Posted March 20, 2012 It does not Sent from my Desire HD using Tapatalk Link to comment Share on other sites More sharing options...
PLAYTOWINBOB Posted March 20, 2012 Share Posted March 20, 2012 Take out coin mech to give yourself more room.Use a drill to drill a small hole or two,then use a gig saw and cut out around your template. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.