johnmi4 Posted January 14, 2013 Share Posted January 14, 2013 I have a Dixie Narco soda machine. It appears that one of the rotors is bent. As it rotates it scrapes the metal of the walls to the right and left. It's a single wide column. The rotor is a cast half cylinder. I've removed the motor and pulled the rotor towards the front of the machine. It is free from the back, but I can't seem to move it out of the machine to replace it. Can anyone give a sugestion? Thanks Link to comment Share on other sites More sharing options...
dogcow Posted January 15, 2013 Share Posted January 15, 2013 u need to take out the delivery chute, its only 1 bolt at the front and a screw, the rotor comes out of the bottom , goes in the same way. Link to comment Share on other sites More sharing options...
johnmi4 Posted January 16, 2013 Author Share Posted January 16, 2013 That did the trick. Thank you Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.