TKK Posted February 9, 2013 Share Posted February 9, 2013 I had a complaint on my vendo. It wasn't taking coins. And then ud put a bill and it would say $1.00 and after like 3 seconds it would say 0.00 credit. So it was taking ppls money. The mech had two flashes which in the sticker it said not connected to vmb or something like that. I restarted it by unplugging it and it was fixed for like 5 minutes. Then it did it again. You could press a selection and it wouldn't say sold out or .75. I unplugged the plug from coin mech and then it had a steady light and worked. Hope it works now. Has anyone had this problem? Link to comment Share on other sites More sharing options...
Vendors Tech Posted February 9, 2013 Share Posted February 9, 2013 Always post the models of the coin changers and validators when you have a problem. Otherwise, I have no clue what the problem could be. Link to comment Share on other sites More sharing options...
TKK Posted February 9, 2013 Author Share Posted February 9, 2013 Trc 6512 Link to comment Share on other sites More sharing options...
TKK Posted February 11, 2013 Author Share Posted February 11, 2013 ? Link to comment Share on other sites More sharing options...
TKK Posted February 13, 2013 Author Share Posted February 13, 2013 Can someone help me out please I hope it got fixed Link to comment Share on other sites More sharing options...
TKK Posted February 24, 2013 Author Share Posted February 24, 2013 Does anyone have a manual? The mech works but its not collecting coins. I manually put some from the box everytime but people putting a $5 are getting hopped Link to comment Share on other sites More sharing options...
ruff84 Posted February 24, 2013 Share Posted February 24, 2013 http://vendoco.com/Documents/TD%20UniVendor%202%20Manual_WHOLE.pdf Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.