mike1 Posted June 20, 2014 Share Posted June 20, 2014 I have an old style wowie zowie, with the pink spiral. How do you remove the plastic cover that is located inside the machine that covers the vending wheel, without tearing the machine half apart? Any retro fits that can make access to the vending wheel from the top to dislodge stuck balls? I know you can remove the vending wheel by taking out the coin mec, but I want to be able to clean the floor of the gumball chamber. The plastic cover doesn't appear to be removable, without taking out some of the gumball tracks. Thanks Link to comment Share on other sites More sharing options...
PowerVendor Posted June 23, 2014 Share Posted June 23, 2014 Mike, all i do is remove screws in two locations that support the ramps on the right. then move the ramps slightly to the right. there is also a bar on the left inside of the cabinet that holds the plastic box down. Loosen that screw and rotate the bar upward. Now you can gingerly remove the clear gumball box. It's not a great design, but you can figure out how to remove it with just some patience and removing three or four screws. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.