dannie Posted June 24, 2011 Share Posted June 24, 2011 Guys I know im putting this in the wrong section, but this section gets read alittle more and I need to fix this asap. My dollar bill accepter is messing up. Its a mei series 2000. The bill acts like its going in, but it will only go about halfway in. When I open the door, I can see the left corner of the bill trying to come thru. It sounds like its working right. Just the bill wont go all the way in. Any ideas? Link to comment Share on other sites More sharing options...
Technivend Posted June 24, 2011 Share Posted June 24, 2011 Does the validator stop or does it sound like it is still trying to pull it in. If it happens in the same spot everytime the first thing I would look at is a mechanical bind like a burr or something stuck in the bill path. Link to comment Share on other sites More sharing options...
dannie Posted June 24, 2011 Author Share Posted June 24, 2011 It stops in the same spot everythime...I will check that. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.