Sandlapper Posted April 24, 2014 Share Posted April 24, 2014 Hi guys. I have a 7 select DN276e narrow column, the one with the brown cams. Can someone tell me what settings I need to vend 16.9 oz Pepsi products? I'm selling 24oz bottles now but want to switch. Thanks in advance. John Link to comment Share on other sites More sharing options...
AZVendor Posted April 24, 2014 Share Posted April 24, 2014 In order to run the smaller bottle you will need to have a bottle shim on the right side of the column and add a rod and spring assembly inside the rotor. The only package setups tested are for Coke products so you might need to adjust the rear spacer from this setting, but Coke bottles use a rear spacer set in hole 23 (from the front) and the motor cam is in hole 3. The rod and spring are installed in the middle holes of the rotor, front and back. If you need a rod and spring assembly you can PM me as I stock these parts. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.