Drcpwen Posted August 4, 2019 Share Posted August 4, 2019 My DN 5591 will accept change and Bill's but won't dispense. It shows credit but the pad doesn't respond when making a selection. When I put it in service mode or test mode the pad seems to work. Any suggestions? Link to comment Share on other sites More sharing options...
lacanteen Posted August 4, 2019 Share Posted August 4, 2019 check your door switch Link to comment Share on other sites More sharing options...
Drcpwen Posted August 4, 2019 Author Share Posted August 4, 2019 I checked the switch with a meter and its functional. It will go in to service and test mode and the keypad seems to work but I'm new to the machine so maybe its possible only some buttons are working?? Link to comment Share on other sites More sharing options...
Drcpwen Posted August 4, 2019 Author Share Posted August 4, 2019 I stand corrected. The switch tested ok on the bench but needed adjustments to make contact with the door. Its working perfectly. Thanks so much for your help. Link to comment Share on other sites More sharing options...
lacanteen Posted August 4, 2019 Share Posted August 4, 2019 Link to comment Share on other sites More sharing options...
Drcpwen Posted August 7, 2019 Author Share Posted August 7, 2019 Thanks again for all the help! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.