B E Posted December 1, 2021 Share Posted December 1, 2021 Why the 24 volt circuit barker get off when I start the machine Link to comment Share on other sites More sharing options...
AZVendor Posted December 1, 2021 Share Posted December 1, 2021 Because you have a short in your 24v circuit. That machine only runs 24v to the logic board and then only to the coin mech and bill validator if that is their voltage (you can also run 110v coinage in that machine.) Unplug the coin mech and validator and turn the machine on. If the breaker trips then it's a bad board or or bad power transformer or power board. If it doesn't trip then it's a bad coin mech or validator (if they are 24v) so try them one at a time. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now