Mike4 Posted January 21, 2022 Share Posted January 21, 2022 Hey All, Got a DN 501e vending a 12 oz can slot 2/1/0. The cam is set #1 pin. What else do I need to be checking. mike Link to comment Share on other sites More sharing options...
AngryChris Posted January 21, 2022 Share Posted January 21, 2022 Hi Mike, the most likely culprit with that pattern is that you have a bottle shim when you need a can shim. If you have the can shim, then the next thing is that you might just need to try a different cam setting with 3 notches and see if it works. After that, I would try adding a rod if you don't already have one and it should be in the middle holes on either end. This is all assuming you are trying to vend out of a narrow column and not a wide column. The wide column would also need the right shimming and a different cam setting and does not use rods. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now