Jump to content

Pepsi Machine Problem

Ken Burks

Recommended Posts

You need to always give the model of your machine.  This could be a bad door switch, poor wires to it, switch not making proper contact with the inner door, wrong coin levels or bad board.  Pull the door switch actuator out and see if the bill acceptor is enabled. Also make sure you have sufficient coins in the coin tubes so the machine knows it can pay change.  If the machine is MDB then check your coin tube levels in the logic board. MDB boards count coins into the tubes and do not rely on the coin level sensors. If you have low counts on your coin tubes then use the Tube Fill mode to fill the tubes through the top acceptor of the coin mech so the machine can count coins into the tubes.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Create New...