Hillbilly Posted October 28, 2012 Share Posted October 28, 2012 Has anybody tried making there own honor boxes from plexiglass? I've been reading up on the subject and think I'm going to try it. Plexiglass and a heat gun. How hard can that be? I have 4 of the cardboard style from Sheridan out on location and in just a short time they look pretty trashy. Link to comment Share on other sites More sharing options...
amc-vending Posted October 28, 2012 Share Posted October 28, 2012 you will need to make some type of jig to do that with. but otherwise it should work Link to comment Share on other sites More sharing options...
HotOiler3 Posted October 18, 2014 Share Posted October 18, 2014 I've used heat guns and torches to bend and form PVC, I see this is a few years old, did you ever try it? How did it turn out? Link to comment Share on other sites More sharing options...
rodney69 Posted October 19, 2014 Share Posted October 19, 2014 I do know that you need clamps all the way across the span our it will bend weird. Link to comment Share on other sites More sharing options...
HotOiler3 Posted October 19, 2014 Share Posted October 19, 2014 I do know that you need clamps all the way across the span our it will bend weird. I would probably just clamp a piece of flat iron across it the length to be bent, I think it'd be fairly easy if you took your time, I'd really like to see a plexiglass honorbox. That'd be cool as hell Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.