57thTom
-
Posts
329 -
Joined
-
Last visited
-
Days Won
4
Content Type
Profiles
Events
Forums
Downloads
Store
Gallery
Blogs
Articles
Classifieds
Everything posted by 57thTom
-
So would I if that is what it came down to. Anything can be moved. I was just commenting on a statement that machines are 3x3. That's just too general of a statement to be true. Now, I just don't know exactly how big of an object could be fit in a minivan. I have never owned one because I think they are ugly.
-
Height is 72: High x 47" Wide x 32" Deep and weight is 800lbs `````````` Refurbished_Dixie_Bevmax4
-
Um, 47 inches wide isn't the same as three feet wide.
-
Take a picture of the harness and save it to Flickr then post the link to the picture here. -
You can save a picture to Flickr and post a link.
-
Won't the winch or the tie offs?
-
How do I convince my boss that cans aren't going to go away?
-
Does the machine show start and duration times that have been set for each channel? -
I can't post any more than 0,01MB files, but there is a label posted above the logic board on the first floor machine (the one I have running) that seems to go with the board. It has a box with these three lines. "This machine contains version "C" or higher software." "Replacement L.C. Board. Part No. 33910-VC" "Do not use board with 203 Single or Dual Cup Program EPROM"
-
The logic boards on both machines look exactly the same. Accessed behind the cup cabinet. I shake too much, so only one image is clear. The bottom line on the eprom is 'C* 01/29/96' The top line is 'V5CZL8Y4' The middle line is written '2319'
-
Ah, yes. The EPROM. From the manual; "The software revision for Model 213 will be known as "Version C" and can be identified by a lilac (light purple) label on the EPROM on the logic board." Nope. No purple label on the EPROM on either logic board. That is why I think the logic boards have been replaced. I have images if you wish. I might be over thinking this, but I attempted to change prices on the machine and it didn't take. Tomorrow I am going to attempt to change the recipe for coffee because there is nothing to lose.
-
First floor machine.
-
Second floor machine.
-
This is the control panel of the machine on the second floor. It's a AP 213. It has no way to select large /small drinks. I'm pretty sure the logic boards have both been replaced in these machines. Is it possible that the control panels have been, also?
-
Yes. If it were set for two cup sizes would those large and small cup figures light up?
-
That doesn't look like the Front Panel in the parts manual.
-
From the album: 57thTom
-
The first floor machine
-
-
http://www.scancoin.com/
