Joe101us Posted May 21, 2017 Share Posted May 21, 2017 Acquired a new well used dixie narco 522E The third column when you make a selection it takes about five minutes for that selection to actually fall the other ones are fine this is my fifth 522E it is the only one doing it first time I've experienced it Link to comment Share on other sites More sharing options...
Chard Posted May 21, 2017 Share Posted May 21, 2017 Check the cam timing and shims (if it has them). It might be that the rotor doesn't turn quite enough due to an improper setting on the cam and the vibration of the compressor shakes it out. What type of product is it doing this with? Sent from my SM-G920T using Tapatalk Link to comment Share on other sites More sharing options...
Joe101us Posted May 21, 2017 Author Share Posted May 21, 2017 16.9 orange crush Link to comment Share on other sites More sharing options...
AZVendor Posted May 21, 2017 Share Posted May 21, 2017 Make sure the shims are identical to what is in other columns that do work. If they are then you either have a slight variation in column width or your motor might have jumped one tooth on it's gearing inside, or it could just be worn out. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.