Fairway Posted January 12, 2012 Share Posted January 12, 2012 Hey guys, I have a few worn out bill acceptors and I was wondering if there was anywhere I could send them to get them refurbished. Thanks Link to comment Share on other sites More sharing options...
dogcow Posted January 12, 2012 Share Posted January 12, 2012 u could try VRS ( http://www.vendorsrepair.com/ ) i'd suggest trying local repair places first. Link to comment Share on other sites More sharing options...
dogcow Posted January 12, 2012 Share Posted January 12, 2012 u could try VRS ( http://www.vendorsrepair.com/ ) i'd suggest trying local repair places first. Link to comment Share on other sites More sharing options...
antoniocinisi Posted January 12, 2012 Share Posted January 12, 2012 I believe a member here offers that service technivend is his screen name. Link to comment Share on other sites More sharing options...
Vendors Tech Posted January 15, 2012 Share Posted January 15, 2012 Vendor's Exchange is the company I recommend. For about $40.00 plus parts, they will repair your validator, and you will have a 1 year warranty on it. Before I started rebuilding units myself, I sent everything to them. They always did a great job. They are the only company I have never had to return a repaired unit under warranty to for repair. We repair units as well. We ask $39.00 plus parts. www.healthy4uvending.com Techivend does it i believe. Other companies would be: Easter Commercial Services United Changers Most other companies, I have heard enough bad experiences about, escpecially when it came to getting warranty coverage, that I would not recommend them. Link to comment Share on other sites More sharing options...
RJT Posted January 15, 2012 Share Posted January 15, 2012 I would check with Techvend from this forum. He helps a lot of members with good information and runs a good company. I am pretty sure they repair validators and coin mechs. Link to comment Share on other sites More sharing options...
Fairway Posted January 16, 2012 Author Share Posted January 16, 2012 Thanks, I'm fairly new at vending and have been just buying new validators, so I was really happy when I realized you could repair them. Link to comment Share on other sites More sharing options...
antoniocinisi Posted January 16, 2012 Share Posted January 16, 2012 Thanks, I'm fairly new at vending and have been just buying new validators, so I was really happy when I realized you could repair them. look on the bright side,at least you have reliable machines that wont get that service call for a while. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.