rafaelv Posted December 28, 2013 Share Posted December 28, 2013 Have a vendo G3 . One selection i have 16oz. Bottle i want to change it to 20oz Need help Link to comment Share on other sites More sharing options...
moondog Posted December 28, 2013 Share Posted December 28, 2013 Have a vendo G3 . One selection i have 16oz. Bottle i want to change it to 20oz Need help A GIII is made by Royal and requires no shims but you will need to program that column to vend one deep and move the the lower retainer clip to the other position for a wider bottle. Your column is probably already programmed for one deep if you currently vend 16 oz. bottles, if not you'll need to enter the step mode in the programming. Link to comment Share on other sites More sharing options...
AZVendor Posted December 28, 2013 Share Posted December 28, 2013 There is a diagram on the inner door that describes the adjustment you need to make in the column. There is a long metal cover on the front of the stack that covers the rods you need to pull out when adjusting the products stops (curved pieces). There are two rods per front and back column. If you are adjusting a front column you will need to pull the rods all the way out and when sliding them back in make sure the rear column is set properly for its product too. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.