blovewell Posted April 28, 2014 Share Posted April 28, 2014 This may be one of the dumbest questions ever posted. But does anybody have any tips for changing the labels on Bevmax. Gates? I have them removed but need some experienced advice on getting new ones in. I have tried removing pins and they are not wanting to come out. Link to comment Share on other sites More sharing options...
AZVendor Posted April 28, 2014 Share Posted April 28, 2014 There's no such thing as a dumb question. If you are asking only about the price lables or selection number lables, they fit into grooves on the back side of the front knuckle. To get them out you pop them out with a small screwdriver. To install them you put one side of the bottom of the label into one side of the groove and gently flex the label in a u-shape away from the knuckle to get the other edge of the label into the groove. Then carefully push it straight down until it bottoms out. You don't want to disassemble the gate to do this. Link to comment Share on other sites More sharing options...
blovewell Posted April 28, 2014 Author Share Posted April 28, 2014 I am working on selection labels right now and I am doing the u-shape thing and keep dropping them. Hahaha I'll keep trying! Link to comment Share on other sites More sharing options...
mission vending Posted April 29, 2014 Share Posted April 29, 2014 I am working on selection labels right now and I am doing the u-shape thing and keep dropping them. Hahaha I'll keep trying! A pair of tweezers or needle nose pliers works great for this. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.