2dudes Posted October 15, 2014 Share Posted October 15, 2014 Has anyone ever heard of two plugs, one for condenser and one for the rest of the machine? Someone tried to explain this to me that there was an issue with the temperature control? and whoever repaired it had to do something at the junction box and separate the power? The machine looks great so if you have any thoughts on why this would be needed let me know. Link to comment Share on other sites More sharing options...
Walta Posted October 15, 2014 Share Posted October 15, 2014 Once I needed to add a heated drain pan to a machine. Rather than cut up the machines wiring I plugged the heater into a empty outlet in the wall. Walta Link to comment Share on other sites More sharing options...
AZVendor Posted October 15, 2014 Share Posted October 15, 2014 This sounds like maybe a case of a failed main power harness in a machine and the repairman was too cheap or too lazy to replace the power harness. On most soda machines there is a main power harness that has a provision for the compressor to plug into. The main junction point where that compressor plug goes also has a thermostat circuit, an evaporator fan circuit and door power circuit coming off of it. Is your machine working or does it look unsafe (it could be)? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.