Lbfrozen Posted April 20, 2015 Share Posted April 20, 2015 For those of you who run Fastcorp F631, Z400, or Evolution, have you tried and had success in making your own bins? As long as they fit the product well and are tightly secured in place, it seems NSF approved corrugated plastic sheeting could be used. If not, has anyone found a good source on full or partial bin kits? I need to reconfigure a few bins from time to time, and the cost is one hurdle, but waiting on parts is the real issue. Thanks. Link to comment Share on other sites More sharing options...
AZVendor Posted April 20, 2015 Share Posted April 20, 2015 There are complete bin kits available without the comb or spacers. This is the stock bin configuration and runs about $300. As for individual bins, they are available as are some of the spacers to make specific branded ice cream work in the bins. Those parts are available individually. I don't think it would be worth your time and effort to make your own bins as it would be all trial and error to get them consistent and to fit correctly. If you need some of these or a full bin kit you can PM me. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.