APplaymaker Posted May 17, 2015 Share Posted May 17, 2015 Should i have the machine level or the front slightly higher than the back so the water runs away from the door? The machine sits outside without a roof over it, im planing on adding a roof but as of now theres not. And i see that some peoples machine has a piece of insulation or something in the front when you open the door at the bottom with the fan and wires cut out, mine doesnt have this do i need it? thanks Link to comment Share on other sites More sharing options...
AZVendor Posted May 19, 2015 Share Posted May 19, 2015 Giving us the model of the machine is always the first step. You can SLIGHTLY tilt it back but that can cause coin entry and drink dispensing issues. If the machine is outdoor rated then it can handle some rain. Not all machines have any kind of seal at the top of the door. Link to comment Share on other sites More sharing options...
APplaymaker Posted May 19, 2015 Author Share Posted May 19, 2015 its a dn501e thanks Link to comment Share on other sites More sharing options...
APplaymaker Posted May 21, 2015 Author Share Posted May 21, 2015 any thoughts on the insulation? Link to comment Share on other sites More sharing options...
cvending Posted May 21, 2015 Share Posted May 21, 2015 The only insulation I can think of might be the foam covering of the refrigeration line that goes from the evaporator coil to the compressor. I believe it is more for protection against any vibration and rubbing. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.