gcobio Posted June 23, 2015 Share Posted June 23, 2015 I encountered an issue with one of my Dixie Narco machines yesterday. Can anyone tell me what would cause one of the cylinders to only turn halfway when dispensing a drink or to only turn halfway after dispensing a drink? Link to comment Share on other sites More sharing options...
cvending Posted June 23, 2015 Share Posted June 23, 2015 Did it work properly before? If you have change packages in that column You may need to adjust the cam on the vend motor for the correct setting. Link to comment Share on other sites More sharing options...
AngryChris Posted June 23, 2015 Share Posted June 23, 2015 Does it make a full 360° turn every other vend? If it starts and stops in the exact same two spots, then your cam setting is setup to vend 2 products per cycle Link to comment Share on other sites More sharing options...
KychrisKy Posted June 27, 2015 Share Posted June 27, 2015 Yea I'm with angry I think wrong cam setting, I've got a cb700 sonetimes one of the motors won't turn so I barely turn it or so slightly bump it, and she works good for a while, so life goes on lol Until she stops again lol Link to comment Share on other sites More sharing options...
dccd Posted July 7, 2015 Share Posted July 7, 2015 Sounds like I'm having a similar problem with my DN 168. It worked good before, now it doesn't dispense cans on one vend and the next, it'll dispense 2. What should I look for? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.