Javaman Posted January 17, 2016 Share Posted January 17, 2016 My machine died at a customer location and after having replced the fuses it still won't power up. Has anyone encountered a component failure that would cause this problem? Noticed a slight arc where the power cable enters the machine. Any troubleshooting suggestions? Thanks. Link to comment Share on other sites More sharing options...
AZVendor Posted January 17, 2016 Share Posted January 17, 2016 If the power cord shorted against the cabinet you probably tripped the outlet's circuit breaker. If not then you may have blown your logic board or relay board. Repair any shorts and plug it into another circuit to try if this one still won't work. Link to comment Share on other sites More sharing options...
abrhouston Posted January 19, 2016 Share Posted January 19, 2016 What's it doing exactly? I just bought a 200 that was brand new, and the drip tray microswitch wasn't in the right position (weird)... I had to drill and relocate it to a good spot for the finger to hit it. Maybe your microswitch isnt working? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.