Jump to content

Sports blaster .50 coin mech


rodney69

Recommended Posts

From the pics you emailed me, it appears as though the "guts" of the mech are the same as other "stock" beaver gear, so in theory there should be some means of switching them out from behind, leaving the plate intact. If that doesn't work, it appears that one could use a thin piece of metal to fill the gap left by a "stock" mechanism.

 

However, before you proceed, you may wish to talk to Beaver's people directly, as they may have a solution that doesn't require significant surgery on the unit, if not something that they can fit you with right out of the box. Good luck!

Link to comment
Share on other sites

I talked to beaver, they said the only way is putting in a Mech that you insert a quarter, then turn and insert another. Those dont typically work well.

I'm contacting vend tech (uturn) to see if they have a conversion bracket since they own the blaster company now.

Link to comment
Share on other sites

I talked to beaver, they said the only way is putting in a Mech that you insert a quarter, then turn and insert another. Those dont typically work well.

I'm contacting vend tech (uturn) to see if they have a conversion bracket since they own the blaster company now.

Hey buddy, would you be able to use the flat aluminum plate and the horseshoe bracket that are found on Spirals for the Beaver mechs? I have 3 of them if you can make those work. You can cut the aluminum plate to whatever size you need. If you need a pic just let me know.
Link to comment
Share on other sites

Hey buddy, would you be able to use the flat aluminum plate and the horseshoe bracket that are found on Spirals for the Beaver mechs? I have 3 of them if you can make those work. You can cut the aluminum plate to whatever size you need. If you need a pic just let me know.

You know, I'm not sure. I'm probably going to wait a couple weeks. We're moving all of our equipment and I didn't want to strip it down only to lose something. Lol

I'll call you when I get measurements. I already have a spot for one of them.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...