VendRJS Posted August 2, 2017 Share Posted August 2, 2017 I have a older USI snack machine I think 3032, some vend motors only turn part way. I have replaced motors and sometimes it fixes the problem, but not always and sometimes problem returns to same motor. I don't think its the motors anymore, has anyone ever had this problem it is happening on all shelfs and seems like more started going out the same week. Link to comment Share on other sites More sharing options...
AngryChris Posted August 2, 2017 Share Posted August 2, 2017 That's an odd problem. They were new motors? Link to comment Share on other sites More sharing options...
VendRJS Posted August 2, 2017 Author Share Posted August 2, 2017 Couple were, I'm wondering if there are any settings that could be changed or is the micro switch the only thing that stops the motor. Link to comment Share on other sites More sharing options...
AngryChris Posted August 2, 2017 Share Posted August 2, 2017 The switch and the voltage sent to it, but I don't know enough to determine if a potential voltage issue is a board problem or something else such as a power supply issue, but if they were used, you definitely need to try new motors. Link to comment Share on other sites More sharing options...
labryan3 Posted August 4, 2017 Share Posted August 4, 2017 Not sure if this'll help but I have one where all the motors on every shelf only turned a quarter turn per vend. I sent the board to Vendors Exchange to fix and for about 60 bucks it's good as new. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.