blacklabel Posted March 19, 2019 Share Posted March 19, 2019 Vendo 480 - 10 selection. How do you change the cam settings? I'm going to all cans and I read that it needs to be set on #3 for 3 deep. I need to know how to change it without messing something up. I'm a newbie at this. Link to comment Share on other sites More sharing options...
AZVendor Posted March 19, 2019 Share Posted March 19, 2019 Slightly flex the front cam away from the rear cam where the adjustment hole is and move the front cam until you can set it on the desired settimg Link to comment Share on other sites More sharing options...
NYCandyMaN Posted March 19, 2019 Share Posted March 19, 2019 you can do 3 and 4 deep I think, but for the 4 deep you need some plastics that are listed on the door, you might even need plastics to go to 3 as well, it should say on the door Link to comment Share on other sites More sharing options...
blacklabel Posted March 20, 2019 Author Share Posted March 20, 2019 Thank you for your help! I have it set right now. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.