jon b Posted November 1, 2022 Share Posted November 1, 2022 i have one of these in an old machine that works fine , but i lose so much time and money the dollar bill works rarely is there a plug and play simple upgrade with out changing the coin part , i am not in the vending business just have a machine in a wood shop i here harness this that , hope im making sense and if someone could advise cheers Link to comment Share on other sites More sharing options...
AZVendor Posted November 2, 2022 Share Posted November 2, 2022 Your coin mech should have one or more extra harnesses to interface to other bill acceptors. You probably also have a single price machine with no credit display on the door so if your coin mech has a white 6 pin plug then that can be used with a Mars bill acceptor which would be a good replacement. You will need a VN2501 with a T-blocker harness for power and a 9 pin harness for the credit line. In addition there will be a pigtail from the bill acceptor harness to connect with the 6 pin plug from the coin mech. Link to comment Share on other sites More sharing options...
AngryChris Posted November 2, 2022 Share Posted November 2, 2022 4 hours ago, jon b said: i have one of these in an old machine that works fine , but i lose so much time and money the dollar bill works rarely is there a plug and play simple upgrade with out changing the coin part , i am not in the vending business just have a machine in a wood shop i here harness this that , hope im making sense and if someone could advise cheers The first thing you need to do is tell us what model machine it is or take a picture of the electronics inside so we can see if it has a board and what kind. Link to comment Share on other sites More sharing options...
AZVendor Posted November 2, 2022 Share Posted November 2, 2022 No he doesn't, I can already foresee it. I'm a swami you know. Link to comment Share on other sites More sharing options...
jon b Posted November 2, 2022 Author Share Posted November 2, 2022 so here are the plugs that i have going into the coin part hopefully i plug something into one of these plugs and in to a new dollar bill acceptor just not sure Link to comment Share on other sites More sharing options...
AZVendor Posted November 2, 2022 Share Posted November 2, 2022 Just what I told you will work in it. Link to comment Share on other sites More sharing options...
jon b Posted November 2, 2022 Author Share Posted November 2, 2022 Mars bill acceptor which would be a good replacement. You will need a VN2501 with a T-blocker harness for power and a 9 pin harness for the credit line. In addition there will be a pigtail from the bill acceptor harness to connect with the 6 pin plug from the coin mech. so i will need a MARS VN2501 the t blocker harness has two plugs 1 for power and a 9 pin for the credit line (sorry what is the credit line ) the pigtail is that a purchased part sorry if i sound dumb like i said im not in the buisness its just a drinks machine in a wood shop Link to comment Share on other sites More sharing options...
jon b Posted November 2, 2022 Author Share Posted November 2, 2022 MARS MEI VFM1 VFM3 UPGRADE VN2501U3 110-115 VAC Dollar Bill Acceptor Validator | eBay would this be a good starting point its an ebay post Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now