orsd Posted January 24, 2015 Share Posted January 24, 2015 Anyone tried to put machines without paint on route before? The splotched appearance seams good for places with a purposefully industrial look Link to comment Share on other sites More sharing options...
rodney69 Posted January 24, 2015 Share Posted January 24, 2015 Not a bad idea. Clear coat? Link to comment Share on other sites More sharing options...
havending Posted January 24, 2015 Share Posted January 24, 2015 Would it not rust? Hillbilly may be able to help on this one. Link to comment Share on other sites More sharing options...
Hillbilly Posted January 25, 2015 Share Posted January 25, 2015 Would it not rust? Hillbilly may be able to help on this one. If I were to do this, I would spray them with a satin finish coat of clear. Another thing I learned in my welding business (years ago) is that you can use a little black and brown spray paint, and then use orange upside down to give it a rust look but actually painted on. Spraying it with the can upside down lets the paint come out splattered. Gives a really nice look. Then spray the satin finish clear over it. Link to comment Share on other sites More sharing options...
Action Vending Posted January 25, 2015 Share Posted January 25, 2015 I think polished aluminum oaks would look nice then cleared. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.