big bo Posted January 9, 2014 Share Posted January 9, 2014 how do I fix my lektro vend that will not give change Link to comment Share on other sites More sharing options...
moondog Posted January 9, 2014 Share Posted January 9, 2014 how do I fix my lektro vend that will not give change You'll likely need a refurbished coin mech - if it's more complicated then you should post the model of the machine and maybe someone will have an answer. Lectrovends are problematic in that they're no longer being made (part of GPL now) or supported parts-wise. Link to comment Share on other sites More sharing options...
big bo Posted January 10, 2014 Author Share Posted January 10, 2014 the machine is a vs99 I have a coin mech in an ap6600 wil they interchange? Link to comment Share on other sites More sharing options...
moondog Posted January 10, 2014 Share Posted January 10, 2014 the machine is a vs99 I have a coin mech in an ap6600 wil they interchange? The mechs are probably both 120v models - whether they are interchangeable or not will depend on the harness you have, the Coinco harnesses are different than the Mei's. Link to comment Share on other sites More sharing options...
venddoctor Posted January 10, 2014 Share Posted January 10, 2014 They are not interchangeable - the Lektro Vend VS99 used 24 volt changers, while the AP6600 used 120V changers. Link to comment Share on other sites More sharing options...
AZVendor Posted January 10, 2014 Share Posted January 10, 2014 the machine is a vs99 I have a coin mech in an ap6600 wil they interchange? Welcome to the forums, big bo! You will find tons of good vending expertise here. The VS99 only uses a 12 pin 24v coin mech. The models are Coinco 9302L or Mars 6010. If you don't have a local source for a rebuilt mech you can PM me and I can send you one. Link to comment Share on other sites More sharing options...
big bo Posted January 10, 2014 Author Share Posted January 10, 2014 thanks for all the info it is greatly appreciated Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.