vendamania Posted October 9, 2014 Share Posted October 9, 2014 Are these machines just limited to cans? Can they vend bottles at all if not how do I vend water? Fred Link to comment Share on other sites More sharing options...
AZVendor Posted October 9, 2014 Share Posted October 9, 2014 You can vend 16.0 oz water by adjusting the motor cam to show only 2 notches on it's edge for the motor switches to fall into. They you will adjust the rear spacer so the front bottle is within one finger's width of the depressed sold out paddle when the bottles are pushed against the rear spacer so the sold out light works properly. You can do other bottles in this machine with certain limitations - 16.9 and 20 oz soda one deep, 16 oz cans one deep, Gatorade bottles two deep. There are certain parts needed for these bottle setups. PM or call me if you need some. Link to comment Share on other sites More sharing options...
vendamania Posted October 9, 2014 Author Share Posted October 9, 2014 So they will vend properly with these adjustments? Sounds good will call you. Link to comment Share on other sites More sharing options...
AngryChris Posted October 9, 2014 Share Posted October 9, 2014 Randy, will you need a new rotor to vend a 20oz bottle? If so, can you still vend cans out of that same rotor or does it need to be converted back? Link to comment Share on other sites More sharing options...
AZVendor Posted October 9, 2014 Share Posted October 9, 2014 The 16.0 oz water will work with the existing can shim and the other settings I mentioned. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.