bcron Posted December 18, 2014 Share Posted December 18, 2014 What are my validator options for a DN501T with an SIID board? I have two Coinco mechs at the moment (don't know the models, I'm away from them.) The current validator in the machine is the old USA red/blue one which is getting too old. It has a 12-pin plug. Link to comment Share on other sites More sharing options...
AZVendor Posted December 18, 2014 Share Posted December 18, 2014 Since you have a USA in it you are not running MDB. This means you can use the Coinco BA30B/Mag50B but you will need a different harness to connect it to the machine. You can also use a Mars VN2501 with the flasher bezel which also needs a different harness and a power pigtail. PM me if you need either harness for this application. Link to comment Share on other sites More sharing options...
AngryChris Posted December 19, 2014 Share Posted December 19, 2014 If you really have an SIID board, it would be worth your while (in my opinion) to buy an MDB harness, MDB validator and MDB coin mech. I have a couple of old SIID and SII machines that I haven't gotten around to doing that yet so they still have 2501's in them. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.