crawdaddy Posted May 29, 2015 Share Posted May 29, 2015 Hi again, Found time to work on my machines today (better pictures will be uploaded soon) but I have run into a problem. We opened the machine to adjust some cams, shut the door and tried to vend a product and the machine no longer takes quarters. Nickels and dimes work fine (bill changer isn't working but wasn't working before anyway). I did some searching and reading and found how to 'teach' the mechanism so we did that with no change. I think we might have done the process wrong and will try again tomorrow but in the mean time does anyone have any other ideas? Link to comment Share on other sites More sharing options...
AngryChris Posted May 29, 2015 Share Posted May 29, 2015 You probably need to have it repaired. If you don't have a spare, it would be a good investment to get one. Link to comment Share on other sites More sharing options...
AZVendor Posted May 29, 2015 Share Posted May 29, 2015 Make sure the machine coin return lever isn't pressing on the coin mech lever and make sure that you have a clean coin path in the acceptor. Run your fingernail along the edge of the coin track to clean it. If you need a replacement you can PM me for an exchange. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.