AngryChris Posted July 31, 2015 Share Posted July 31, 2015 I recently changed a machine from a MAKA to a vn 2511. I've done several but this one wouldn't work. The validator gave the 2-flash "disabled from vmc/mech" error. When I took the bill box off, the board would buzz. I figure it's most likely the board or mech. Any ideas? I think I'm going to try to get my spare board repaired regardless. Link to comment Share on other sites More sharing options...
AZVendor Posted July 31, 2015 Share Posted July 31, 2015 Make sure it isn't the coin mech that is buzzing. I've had the coin mechs do that due to a bad SMIII logic board. The last one I had this on would jackpot change and later it melted the payout solenoids. Let me know if you need an exchange board for it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.