Clean Life Posted January 5, 2017 Share Posted January 5, 2017 I have an AP 6600 that four selections in a row stopped working. Any suggestions? Link to comment Share on other sites More sharing options...
Vendors Tech Posted January 5, 2017 Share Posted January 5, 2017 Swap the tray with a working one from somewhere else in the machine. Does the problem follow the tray, or does it stay on the level where the tray was originally? Link to comment Share on other sites More sharing options...
lacanteen Posted January 5, 2017 Share Posted January 5, 2017 Exactly which selections? Make sure your door switch is working. Press "test" then close the door. It should go back to sales mode. Link to comment Share on other sites More sharing options...
cvending Posted January 6, 2017 Share Posted January 6, 2017 Can you please exactly what "stopped working" means? Is there an error message wen trying to vend? Is the credit erased? Link to comment Share on other sites More sharing options...
Clean Life Posted January 6, 2017 Author Share Posted January 6, 2017 It just says make another selection. It will return the money if you press the coin return. Link to comment Share on other sites More sharing options...
lacanteen Posted January 6, 2017 Share Posted January 6, 2017 Did you verify your door switch? The board can't find motors without it. Link to comment Share on other sites More sharing options...
moondog Posted January 6, 2017 Share Posted January 6, 2017 29 minutes ago, Clean Life said: It just says make another selection. It will return the money if you press the coin return. Since it's only four selections on the same tray, I'd say the tray isn't lining up properly - check your rollers to make sure they don't have flat spots. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.