Oak gum wheel. Vending 2 or more

[Coal River Vending]

 

What am I doing wrong? Timing? You can shake knob and will let them fall as well.

 

 

Sent from my iPhone using Tapatalk

[vendtex]

That looks like a capsule wheel not a gumball one. But I'm still something of a newbie


Sent from my iPhone using Tapatalk

[Coal River Vending]

That would make sense


Sent from my iPhone using Tapatalk

[QuikVend]

Make sure the wheel opening is perfectly lined up with the chute opening. With the riser, it should only vend 1 gb.

[gumball guy]

That looks like an Eagle capsule wheel. It won't work correctly with gumballs. The gumballs will pinch/jam & misvend against that plastic part covering the chute. You need a 2 spring brush housing and it should work correctly. You can order it from Eagle or Oak or Ebay.

[Hillbilly]

5 hours ago, Coal River Vending said:

 

 

What am I doing wrong? Timing? You can shake knob and will let them fall as well.

 

 

Sent from my iPhone using Tapatalk

 

Your brush is installed upside down. 

[Coal River Vending]

Your brush is installed upside down. 

Fixed that. Should it have 1 or 2 springs? Do I have the right parts?


Sent from my iPhone using Tapatalk

[gumball guy]

That is an Eagle capsule brush housing. You really should use a double spring brush (doesn't have that plastic part covering the chute) housing. The gumballs (850s) have a tendency to jam on that plastic piece covering the chute when you are turning the handle. It is especially bad when the unit is more than half full. It will make the wheel jump causing mis-vends. You can get the double spring housing from Eagle, Oak or ebay.